There are the following steps: inspecting the raw material → applying water → measuring the concentration → removing the glaze → applying the glaze → drying → brushing the glaze → clearing the feet
1. Inspection of prime tires: inspect the prime tires one by one, and eliminate unqualified prime tires.
2. Watering: clear the ashes and water the qualified plain tires one by one, so that the glaze can be tightly combined on the plain tires.
3. Measure the concentration: Stir the glaze slurry in the glaze vat evenly, and use the concentration meter to measure the appropriate concentration.
4. Scouring the glaze: Use a basket to scoop out the impurities mixed in the glaze slurry of the glaze vat to ensure the quality of the glaze.
5. Glazing: Glaze by rinsing glaze, dipping glaze and other methods, so that the inside and outside of the plain tire are glazed.
6. Drying: Put the glazed glaze body in a place with a certain temperature for drying.
7. Brushing glaze: In order to achieve the required thickness of the glaze layer, a layer of glaze is applied on the dried glaze body.
8. Cleaning the feet: remove the excess glaze on the feet of the glaze body and other places.
Post time: Jan-07-2023